Smart Vision Lights - Projector LIGHTS
SVL Projector Lights Overview
Pattern Projector lights from Machine Vision Direct project a fixed pattern onto a surface. Collimating light is projected through an etched pattern (reticles). The etched pattern is then sent through a camera lens (sold separately) that will project the pattern onto the desired surface. The size of the pattern projected is a function of the working distance, the etching size on the reticle, and the focal length of the camera lens. The projected patterns are static; the reticle must be replaced to change them.
MVD offers a variety of standard patterns (reticles); however, custom reticles can be created if needed. As sizing a pattern projector system can be a bit more complicated, please do not hesitate to contact Machine Vision Direct for support quoting a system.
SXP30 Structured Pattern Projector Light
The SXP30 Series Projector Light offers a homogeneous light pattern. The 9 mm2 die emits nine times the intensity of a standard high-output LED. The housing is constructed of finned 6061-T6 aluminum and designed to dissipate as much heat as possible, therefore allowing the LED to be run at a much higher current than the standard 1 mm2 die LEDs. Multiple interchangeable pattern styles are available along with optional custom patterns. The SXP30 Series is able to project a thinner and more defined pattern of light compared to laser projectors, making the SXP30 a more accurate light.
Specifications
Constant On: Yes
Strobe: Yes
Strobe Overdrive: No
Dimmable: Yes
Length:
Driver: SmartDrive
IP Rating:
Wavelengths: White, 470nm, 530nm, 625nm, 850nm
ODSXP30 Overdrive Structured Pattern Projector Light
The ODSXP30 Series Projector Light offers a homogeneous light pattern. This light is designed for Overdrive strobe mode only and offers NPN or PNP trigger signal input. The 9 mm2 die emits five times the intensity of a constant current SXP30. The housing is constructed of finned 6061-T6 aluminum and designed to dissipate as much heat as possible, therefore allowing the LED to be run at a much higher current than the standard 1 mm2 die LEDs. Multiple interchangeable pattern styles are available along with optional custom patterns.
Specifications
Constant On: No
Strobe: Yes
Strobe Overdrive: Yes
Dimmable: Yes
Length:
Driver: OverDrive
IP Rating:
Wavelengths: White, 470nm, 530nm, 625nm, 850nm
SXP80 High Powered Structured Light Pattern Projector
The SXP80 Series is among the highest intensity LED based projectors available in the market. With the ability to produce a thin and well-defined light pattern, the SXP80 performs with intensities comparable to that of laser projectors but without the speckle and can be used both far-field and near-field applications. The projector features Multi-Drive along with Smart Vision Lights newest high-speed, high-output driver technology and forced-air cooling. This combination provides very fast high energy strobe capabilities as well as the highest intensity continuous operation available.
Specifications
Constant On: Yes
Strobe: Yes
Strobe Overdrive: Yes
Dimmable: Yes
Length:
Driver: MultiDrive
IP Rating:
Wavelengths: White, 470nm, 530nm, 625nm