R130-530-N | R130 EZ Mount Ring Light (130mm) | 530nm Green Light, Narrow 14 Degree Lens

Smart Vision LightsSKU: R130-530-N
Lead Time: 3 Business Days

Sale price$629.00 USD

Shipping calculated at checkout

This is a Sample Product Title
Was $200.00 Now $100.00

Lead Times

Lead Times are estimated based on standard product lead times, but are subject to change. For the latest product lead times, we always recommend contacting us


R130 Ring Lights (R80 Pictured)

Product Details

  • Conversion adapters for different cameras
  • PNP and NPN Strobe Input
  • Continuous operation or strobe mode
  • Dimmable via built in potentiometer
  • Standard with wide lenses
  • Analog intensity 0-10VDC signal
  • Eight, 1mm² Die High Current LEDs

Smart Vision Lights R130 Technical Specifications

R130 Continuous Operation Specifications    

Electrical Input  24 VDC +/- 5%
Input Current Max. 500 mA
Input Power  Max. 12 W
PNP Trigger 2.8 mA @ 4VDC | 8.8 mA @ 12VDC | 17.6 mA @ 24VDC
NPN Trigger 14.4 mA @ Common (0VDC)
Trigger Input
PNP > +4 VDC (24 VDC max.) to activate or NPN ‰¥ GND <1VDC to activate (not both)
Strobe Duration Min. 30 μs | Max. ˆž
 Strobe Trigger Latency 10 μs
 Power Indicator Turns green when powered up
Status Indicator Strobe indicator will turn yellow when on
Intensity Limit 270° turn-pot. Turn clockwise to increase intensity limit.
Analog Intensity
The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity
5-pin M12 connector
Operating Temperature 
-10° to 40° C (14° to 104° F) | RH max 80% non-condensing humidity
Storage Temperature
-20° to 70° C (-4° to 158° F) | RH max 80% non-condensing humidity
Ip Rating IP50
Weight ~0.7 lbs | ~325 g
Compliance CE, IEC 62471, RoHS
Warranty 10 years1


All EZ Mount LED Ring Light Mount Directly to a Camera Lens
The EZ Mount LED Ring Light can be quickly and easily adapted to any vision system with either of four standard mounting options. First, there is a standard M46 thread protruding from the back of the EZ Mount LED Ring Light. Using readily available step-up or step-down rings it can be mounted directly to the threads found on the front end of most lenses. Second is the ability to mount the lens at the front end of the EZ Mount LED Ring Light. Once again, an off-the-shelf step up or step down adapter ring can be used to adapt lenses with M43 or smaller filter mounting threads. A flange at the front end of the EZ Mount LED Ring Light holds the step ring with three set screws, and the camera lens is inserted through the center of the EZ Mount LED Ring Light and threaded onto the step ring. In those few cases where the lens's locking thumbscrews may prevent the lens from fitting through the center of the EZ Mount LED Ring Light, extra low-profile replacement set screws are included, allowing the protruding thumbscrews to be removed. Step up and Step down adapter rings are not included with the light. Third is a T-slot on all sides. Standard industrial T-nuts can be dropped into the slot for mounting. Fourth way to mount the light is using the threaded M4 holes on the back plate of light. The EZ Mount LED Ring Light are a high output LED light in an aluminum housing. Housing uses industry standard T-Slots for ease of mounting. Ring Lights are available in light output of White, Red, Amber, Blue, Green, Cyan, IR and UV. Ring Light includes an integrated constant current driver with a built in strobe input with option for PNP or NPN trigger control. No need for an external driver to control the light. The integrated driver also includes variable light intensity control. Light can be controlled by a manual potentiometer or a 0-10VDC analog signal.

The all metal construction of the Ring Light Series of lights provides a small particle resistant and all around durable light. Its simple plug and play 5 Pin M12 connector allows for ease of use while allowing for full control. The 0-10 VDC intensity control assists in gaining full control of the light output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kits adapters. The R130 operates with either an NPN or a PNP signal and runs on an industry standard 24 VDC.

Wavelength Colors
R130 Wavelength Colors Smart Vision Lights


Thread Adapters (Or Direct to Camera Mount Adapters) are both available for mounting the EZ Mount Ring Lights directly to your lens or camera body. Please Reference the Datasheet for your respective lens to confirm thread size prior to ordering a thread adapter. Direct to Camera Mount Adapters are also thread adapters that mount the light directly to the body of your camera.

R130 Downloads 

R130 Datasheet | Smart Vision Lights R130 3D STEP Model | Smart Vision Lights
R130 2D DXF Drawing | Smart Vision Lights R130 PDF Dimension Drawing | Smart Vision Lights


Possible Product Configurations:

Estimate shipping

Payment & Security

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed