Lead Times
Lead Times are estimated based on standard product lead times, but are subject to change. For the latest product lead times, we always recommend contacting us
Description
RMX140-RGBW Mini Ring Lights
RMX140-RGBW can be sold as just the Light (RMX140-RGBW) or a Kit (RMX140-RGBW-KIT) which Includes the RMX140-RGBW Light, a cable, and 4WMD Driver
Product Details
- Kit includes the RMX140-RGBW AND 4WMD-250 for tuning individual wavelengths
- PNP and NPN high speed trigger signal input
- 5-pin M12 quick connect (reverse key)
- Over-Current Protection
- Continuous Operation or Strobe Mode
- Silicone lens
Smart Vision Lights RMX140-RGBW Technical Specifications
RMX140-RGBW Continuous Operation Specifications
| Maximum LED Input Current | 100 mA |
| Input Connector | 5-pin M12 connector (male — reverse-key) |
| Strobe | Not applicable |
| Duty Cycle | Not applicable |
| Ambient Temperature | 0º–45ºC (32º–114ºF) |
| Weight | ~365g |
| Ip Rating | IP50 |
| Warranty | 10 year. For complete warranty information, visit smartvisionlights.com/warranty |
| Compliances | CE, RoHS, IEC 62471 |
RMX140-RGBW OverDrive Strobe Mode Specifications
| Maximum LED Input Current | 100 mA |
| Input Connector | 5-pin M12 connector (male — reverse-key) |
| Strobe | Max. 50 ms |
| Duty Cycle | Max. 10% |
| Ambient Temperature | 0º–45ºC (32º–114ºF) |
| Weight | ~365g |
| Ip Rating | IP50 |
| Warranty | 10 year. For complete warranty information, visit smartvisionlights.com/warranty |
| Compliances | CE, RoHS, IEC 62471 |
4WMD-100 Driver
Standard Specification
| Electrical Input | 24VDC +/- 5% |
| Electrical Input Connector | 2-position screw terminal blocks – 14 AWG max wire size |
| Input Current | Max. 800 mA |
| Input Power | Max. 19.2 W |
| Operating Current (No Load) | 70 mA |
| Number of Input Channels | 4 |
| Input Connector |
10-position screw terminal block – 14 AWG max wire size (4 for channel control, 4 for analog, and 2 for PNP/NPN strobing/trigger) |
| Trigger Input |
PNP trigger: +4VDC or greater to activate (max 26VDC) NPN trigger: GND (<1VDC) to activate |
| Input Channel Current |
PNP input: 4 mA @ 4VDC | 10 mA @ 12VDC | 20 mA @ 24VDC NPN input: 15 mA @ Ground (0VDC) |
| Analog Intensity | Continuous Operation: The output is adjustable from 10%–100% of intensity by applying 1–10VDC signal OverDriveTM Strobe Mode: Apply 0VDC |
| Output Channels | 4 channels for LED tuning control |
| Output Connectors |
One 5-pin M12 reverse-key connector 5-position screw terminal block – 14 AWG max wire size |
| Indicator Lights | Power on = Green light Individual channels = Yellow light Service = Red light |
| Mounting | DIN rail |
| Dimensions |
H = 102 mm (4.0"), L = 119 mm (4.7"), W = 45 mm (1.8") |
| Operating Temperature | -10° - 40° C (14°-104° F) | RH max 80% non-condensing humidity |
| Ambient Humidity | 0%–95% noncondensing |
| Weight | ~233 g |
| Compliances | CE, RoHS |
| Terminal Block Plugs (Included with 4WMD) |
2-position terminal block plug 5-position terminal block plug 10-position terminal block plug |
| Warranty | 3 year. For complete warranty information, visit smartvisionlights.com/warranty |
CONTINUOUS OPERATION
| Input Current | 440 mA |
| Input Power | 10.5 W |
OverDrive Strobe Mode
| Input Current | 3.4 A |
| Input Power | 82 W |
MINI RING LIGHT OVERVIEW
Smart Vision Lights most compact ring lights are the RM75/RMX75 and RM140/RMX140 mini LED ring lights. These mini LED ring lights features our built-in Multi-Drive™ controller allowing users to operate the mini ring light continuously or in OverDrive™ Strobe mode. Our mini LED ring lights are extremely bright and available in multiple wavelengths to meet your application needs. All mini LED ring lights feature a standard 5-pin M12 connector makes wiring simple. The 110 V analog control line gives the user total control over intensity. The built-in Multi-Driver™ also protects the LEDs from premature degradation and failure caused by excessive heat by regulating the current delivered to the LEDs and limiting the duty cycle of the light.
The compact and powerful RMX140-RGBW Mini Ring Light is a small to mid-range working distance ring light. The RMX140-RGBW series features an aluminum housing and is IP50 rated. Each wavelength can be tuned individual of the other wavelengths, allowing for the light to output just about any color imaginable. The RMX140-RGBW (KIT) includes a RMX140 Ring Light and a 4WMD-100 external driver.
4WMD DRIVER OVERVIEWThe 4WMD permits up to four independent channels to be tuned individually. The 4WWD has independent tuning controls and built-in MultiDrive™, allowing for the intensity range to be set from 10%–100% for continuous operations or OverDrive™ strobe mode. In addition, when in continuous operation mode, the intensity can be adjusted using the analog signal line. Disabling a channel will turn off the wavelength tied to that channel. Each output channel has its own tuning control located on the front of the driver
Recommended illumination usage: Bright Field, Radial
Using the Reverse-Key 5-pin M12 Connector
When connecting a Smart Vision Lights™ RGBW light to the 4WMD, a reverse-key 5-pin M12 cable is required. All Smart Vision Lights™ RGBW lights come equipped with a 5-pin reverse-key connector. With very little wiring needed, the reverse-key 5-pin M12 connector simplifies connecting lights to the 4WMD
NOTE: Smart Vision Lights™ uses reverse-key cables that have a blue-grey tip on the connectors. A 2 meter version of the cable is included when ordered (Part number: 5PM12-J2000-KR)
| PIN | CHANNEL | COLOR |
| 1 | COMMON | BROWN |
| 2 | 1 | WHITE |
| 3 | 2 | BLUE |
| 4 | 3 | BLACK |
| 5 | 4 | GRAY |
HOW TO DISABLE A CHANNEL
| If one or more wavelengths are not needed, the channels associated with the wavelength can be disable. Disabling a channel will turn off the wavelength. To disable a channel, connect that channel to ground (GND). Example: To disable channel 4, connect NPN Disable IN 4 to GND. |  |
TUNING WAVELENGTHS
The 4WMD allows for the tuning of up to four individual wavelength intensities. Depending on its configuration, a channel can tune the output intensity of a given wavelength for either continuous operation or OverDrive™ strobe mode. Each channel can be tuned for continuous operation or OverDrive™ strobe mode. Continuous operation and OverDrive™ cannot be used simultaneously. Each channel has a yellow indicator light that illuminates when the channel is active
When connecting the RMX140-RGBW to the 4WMD, wavelength are set to be controlled as followed.
MOUNTING USING ADP0002-KIT MOUNTING BRACKET
The RM140 and RMX140 lights may be mounted using the ADP0002-KIT mounting plate and optional thread adapters. To mount with this method, the ADP0002-KIT mounting bracket must be purchased. The ADP0002-KIT bolts to the rear of the light and has an M46 thread in its center. A Step Up or Step Down thread adapter must then be purchased to adapt your lens or camera to this M46 Thread. Please reference the datasheet for your light or camera in order to determine the appropriate thread adapter to purchase. 
MOUNTING USING T-NUTS
Mounting options include four (4) T-slots & four (4) M4 threaded holes.
Hardware included:
(2) M4x16 screws
(2) M4 nylon nuts
RMX140-RGBW ACCESSORIES
| PART NUMBER | IMAGE |
 |
|
 |
|
 |
|
 |
|
 |
|
 |
RMX140-RGBW Downloads
 |
 |
 |
 |
Possible Product Configurations:
RMX140-RGBW
RMX140-RGBW-KIT
Estimate shipping
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.