R80-505 | R80 EZ Mount Ring Light (80mm) | 505nm Cyan Light, Wide 30 Degree (Standard) Lens

Smart Vision LightsSKU: R80-505
Lead Time: 3 Business Days

Price:
Sale price$454.00 USD

Shipping calculated at checkout

This is a Sample Product Title
Was $200.00 Now $100.00
Downloads

Lead Times

Lead Times are estimated based on standard product lead times, but are subject to change. For the latest product lead times, we always recommend contacting us

Description

R80 Ring Lights Product Details

  • T-Slot for mounting
  • Conversion adapters for different cameras
  • PNP and NPN strobe input
  • Continuous operation or strobe mode
  • Dimmable via built in potentiometer
  • Analog intensity 0-10VDC signal
  • Four, 1mm² die high current LEDs

Smart Vision Lights R80 Technical Specifications

R80 Continuous Operation Specifications    

Electrical Input  24 VDC +/- 5%
Input Current 
Max. 350 mA
Input Power
Max. 8.4 W
PNP Trigger
2.8 mA @ 4VDC | 8.8 mA @ 12VDC | 17.6 mA @ 24VDC
NPN Trigger 14.4 mA @ Common (0VDC)
Trigger Input PNP > +4 VDC (24 VDC max.) to activate or NPN ‰¥ GND <1VDC to activate (not both)
Strobe Duration  Min. 30 μs | Max. ˆž
Strobe Trigger Latency 10 μs
Power Indicator  Turns green when powered up
Status Indicator  Strobe indicator will turn yellow when on
Intensity Limit  270° turn-pot. Turn clockwise to increase intensity limit.
Anlaog Intensity The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal.
Jumpering pin 5 to pin 1 will provide maximum intensity
Connection 5-pin M12 connector
Operating Temperature  -10° to 40° C (14° to 104° F) | RH max 80% non-condensing humidity
Storage Temperature -20° to 70° C (-4° to 158° F) | RH max 80% non-condensing humidity
IP Rating IP50
Weight
~0.4 lbs | ~183 g
Compliances CE, IEC 62471, RoHS
Warranty 10 years1

 

All EZ Mount LED Ring Light Mount Directly to a Camera Lens
The EZ Mount LED Ring Light can be quickly and easily adapted to any vision system with either of four standard mounting options. First, there is a standard M46 thread protruding from the back of the EZ Mount LED Ring Light. Using readily available step-up or step-down rings it can be mounted directly to the threads found on the front end of most lenses. Second is the ability to mount the lens at the front end of the EZ Mount LED Ring Light. Once again, an off-the-shelf step up or step down adapter ring can be used to adapt lenses with M43 or smaller filter mounting threads. A flange at the front end of the EZ Mount LED Ring Light holds the step ring with three set screws, and the camera lens is inserted through the center of the EZ Mount LED Ring Light and threaded onto the step ring. In those few cases where the lens's locking thumbscrews may prevent the lens from fitting through the center of the EZ Mount LED Ring Light, extra low-profile replacement set screws are included, allowing the protruding thumbscrews to be removed. Step up and Step down adapter rings are not included with the light. Third is a T-slot on all sides. Standard industrial T-nuts can be dropped into the slot for mounting. Fourth way to mount the light is using the threaded M4 holes on the back plate of light. The EZ Mount LED Ring Light are a high output LED light in an aluminum housing. Housing uses industry standard T-Slots for ease of mounting. Ring Lights are available in light output of White, Red, Amber, Blue, Green, Cyan, IR and UV. Ring Light includes an integrated constant current driver with a built in strobe input with option for PNP or NPN trigger control. No need for an external driver to control the light. The integrated driver also includes variable light intensity control. Light can be controlled by a manual potentiometer or a 0-10VDC analog signal.

R80 RING LIGHT OVERVIEW
The all metal construction of the Ring Light Series of lights provides a small particle resistant and all around durable light. Its simple plug and play 5 Pin M12 connector allows for ease of use while allowing for full control. The 0-10 VDC intensity control assists in gaining full control of the light output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kits adapters. The R80 operates with either an NPN or a PNP signal and runs on an industry standard 24 VDC.

Wavelength Colors
R80 Wavelength Colors Smart Vision Lights

WIRING

MOUNTING USING THREAD ADAPTERS
Thread Adapters (Or Direct to Camera Mount Adapters) are both available for mounting the EZ Mount Ring Lights directly to your lens or camera body. Please Reference the Datasheet for your respective lens to confirm thread size prior to ordering a thread adapter. Direct to Camera Mount Adapters are also thread adapters that mount the light directly to the body of your camera.

R80 Downloads 

R80 Datasheet | Smart Vision Lights R80 3D STEP Model | Smart Vision Lights
R80 2D DXF Drawing | Smart Vision Lights R80 PDF Dimension Drawing | Smart Vision Lights

 

Possible Product Configurations:
R80-365
R80-395
R80-470
R80-505
R80-530
R80-625
R80-850
R80-940
R80-WHI
R80-365-N
R80-395-N
R80-470-N
R80-505-N
R80-530-N
R80-625-N
R80-850-N
R80-940-N
R80-WHI-N

Estimate shipping

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed