Lead Times
Lead Times are estimated based on standard product lead times, but are subject to change. For the latest product lead times, we always recommend contacting us
Description
Smart Vision Lights LZE300 Technical Specifications
LZE300 Continuous Operation Specifications
| Electrical Input | 24 VDC +/- 5% |
| Input Current | Max. 850 mA |
| Input Power | Max. 20 W |
| PNP Trigger | 2 mA @ 4VDC | 7 mA @ 12VDC | 13.4 mA @ 24VDC |
| NPN Trigger | 12 mA @ Common (0VDC) |
| Mode Control |
Connect pin 5 to 1 - 10 VDC (10 - 100% output); 24VDC (Max) |
| Trigger Input | PNP > +4 VDC (24 VDC max.) to activate or NPN ‰¥ GND <1VDC to activate (not both) |
| Strobe Duration | Min. 30 μs | Max. ˆž |
| Strobe Trigger Delay | 10 μs |
| Strobe Frequency | Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less.1 |
| Duty Cycle | Not Applicable |
| Power Indicator | Turns green when powered up |
| Analog Intensity |
The output is adjustable from 10% - 100% by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. Intensity can be remotely adjusted via SmartVisionLink2 |
| Connection | 5-pin M12 connector |
| Operating Temperature | -10° to 40° C (14° to 104° F) | RH max 80% non-condensing humidity |
| Storage Temperature | -20° to 70° C (-4° to 158° F) | RH max 80% non-condensing humidity |
| IP Rating | IP68 |
| Weight |
Stainless Steel: 4.25 lbs | 1.9 kg Nonstick: 2.00lbs | 0.9 kg |
| Compliances | CE, IEC 62471, RoHS |
| Warranty | 10 years |
LZE300 OverDrive Operation Specifications
| Electrical Input | 24 VDC +/- 5% |
| Input Current | Peak 6 A during strobe |
| Input Power | Peak 144 W during strobe |
| PNP Trigger | 2 mA @ 4VDC | 7 mA @ 12VDC | 13.4 mA @ 24VDC |
| NPN Trigger | 12 mA @ Common (0VDC) |
| Mode Control | Connect pin 5 to GND (See wiring configuration for more information) |
| Trigger Input | PNP > +4 VDC (24 VDC max.) to activate or NPN ‰¥ GND <1VDC to activate (not both) |
| Strobe Duration | Min. 10 μs | Max. 50 ms |
| Strobe Trigger Delay | 6 μs |
| Strobe Frequency | Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less.1 |
| Duty Cycle | Max 10% |
| Power Indicator | Turns green when powered up |
| Analog Intensity |
Light is set to maximum intensity by default in OverDrive mode and can only be adjusted via SmartVisionLink2 |
| Connection | 5-pin M12 connector |
| Operating Temperature | -10° to 40° C (14° to 104° F) | RH max 80% non-condensing humidity |
| Storage Temperature | -20° to 70° C (-4° to 158° F) | RH max 80% non-condensing humidity |
| IP Rating | IP68 |
| Weight |
Stainless Steel: 4.25 lbs | 1.9 kg Nonstick: 2.00lbs | 0.9 kg |
| Compliances | CE, IEC 62471, RoHS |
| Warranty | 10 years |
The LZE300, a SmartVisionLink enabled linear light, has similar features and functions as the LXE300, with the addition of communication with a SmartVisionLink managing device, such as the BTM-1000. When the LZE300 is connected to the BTM-1000, its intensity can be fully controlled, either for the entire light or for each of the three LED zones. Individual zones may also be turned off. The standard LZE300 has a 12 LED configuration.
The LZE300 is available in three different connector options:
- Direct Connect €“ This is the default option which allows connecting lights together with no additional cables. Lights are directly connected together, with no space between the lights. Up to six LZE300 lights can be directly connected together.
- Daisy-Chain €“ The Daisy-Chain option allows for a locking 5PM-12 Jumper Cable to be used when connecting LZE300 lights together. Lights are able to be spaced apart from each other. Up to six LZE300 lights can be Daisy-Chained together.
- Plug €“ If multiple units are not going to be used, a plug termination can be ordered.
The LZE300 also comes with NanoDrive technology, which enables a faster €œon€� and €œoff€� compared to other technology.
Product Highlights
- Connect up to six lights in a line without loss of uniformity
- SmartVisionLink enabled to allow for easy intensity adjustment in both continuous and OverDrive strobe modes
- Ability to control intensity for the entire light or for each of the three LED zones when using BTM1000 Bluetooth Module
- Standard LZE300 has a 12 LED Configuration
- NanoDrive allows the light to be fully on in less than 500ns
SmartVisionLink
SmartVisionLink provides a way for a light to communicate with an app on a mobile device or tablet. This technology allows users to adjust the intensity of the light in both continuous operation and OverDrive strobe mode. By connecting the BTM-1000 Bluetooth module to a light that is SmartVisionLink-enabled, a user can adjust parameters for the light. The SmartVisionLink app is available free to download in the Apple App and Google Play Stores.
Mounting
Four screw holes are located on the bottom of the light for easy mounting
Four M5 Screws are included with the light
Additionally, a 3-Axis pan and tilt mount (Part #: PB300-M5) can be used for mounting. This is optional and can be purchased separately.
Connecting a BTM-1000 Module
The BTM-1000 can be connected directly to a light or attached to a jumper cable that is connected to a light. Once the light's intensity is set to desired level, the BTM-1000 can be removed from the light or cable. The pigtail end of the BTM-1000 is connected directly to the light or to the cable attached to the light.
Managing Multiple Lights
Using the SmartVisionLink app, a user is able to adjust intensity levels for a string of up to 6 lights. Each light or each zone in a multizone light are able to have its intensity adjusted independently of the other lights and zones. When direct connecting six LZE300 the user is able to manage 18 individual zone intensities.
Zone Configuration
The LZE300 is divided into 3 zones. Each zone intensity level can be set independent of the other zones using the SmartVisionLink app and controller, such as the BTM-1000 (Bluetooth module). Each zone is 100 mm in length.
Zone 1 is located at the end with the female connector.
Understanding Zones
The LZE300 is a light that is SmartVisionLink-enabled and is designed so the intensity can be adjusted using the SmartVisionLink app. The LZE300 has 3 built-in zones, allowing for each zone intensity to be set independent of the other zones. Individual zones can also be turned off. Being able to adjust zones within a single light can help reduce hot spots and ensure even uniformity across a string of lights.
Direct Connect vs. Daisy Chain
Direct Connect LZE300 lights allow for connecting lights together with no additional cables. Lights are directly connected together, with no space between the lights.
Daisy Chain
Daisy chain allows for a standard 5PM12 jumper cable to be used to connect LZE300 lights together. Lights are able to be spaced apart from each other.
Wavelength Colors
LZE300 is available in 365nm, 395nm, 470nm, 505nm, 530nm, 625nm, 850nm, 940nm, and White
This light is also available in SWIR wavelengths, please contact us for price and lead time for SWIR wavelength lights.
Multi-Drive Wiring
Wiring Configuration for CONSTANT ON Operation
Wiring Configuration for STROBE/PULSE Operation
LZE300 Downloads
 |
 |
 |
 |
Possible Part Configurations:
LZE300-365LZE300-395
LZE300-470
LZE300-505
LZE300-530
LZE300-625
LZE300-850
LZE300-940
LZE300-WHI
LZE300-365-W
LZE300-395-W
LZE300-470-W
LZE300-505-W
LZE300-530-W
LZE300-625-W
LZE300-850-W
LZE300-940-W
LZE300-WHI-W
LZE300-365-L
LZE300-395-L
LZE300-470-L
LZE300-505-L
LZE300-530-L
LZE300-625-L
LZE300-850-L
LZE300-940-L
LZE300-WHI-L
LZE300-365-LPI
LZE300-395-LPI
LZE300-470-LPI
LZE300-505-LPI
LZE300-530-LPI
LZE300-625-LPI
LZE300-850-LPI
LZE300-940-LPI
LZE300-WHI-LPI
LZE300-365-W-LPI
LZE300-395-W-LPI
LZE300-470-W-LPI
LZE300-505-W-LPI
LZE300-530-W-LPI
LZE300-625-W-LPI
LZE300-850-W-LPI
LZE300-940-W-LPI
LZE300-WHI-W-LPI
LZE300-365-L-LPI
LZE300-395-L-LPI
LZE300-470-L-LPI
LZE300-505-L-LPI
LZE300-530-L-LPI
LZE300-625-L-LPI
LZE300-850-L-LPI
LZE300-940-L-LPI
LZE300-WHI-L-LPI
Estimate shipping
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.