Lead Times
Lead Times are estimated based on standard product lead times, but are subject to change. For the latest product lead times, we always recommend contacting us
Description
LLPX Series - Light Tent or Dome Type of illumination 
The LLPX-H Series is Smart Vision Lights' second generation of LLP-H ring light panels that allows for more intensity with the same familiar ease of mounting. A new optically clear internal light dispersion grid and matte white-finished backing plate allow more light to reflect up and out through the diffusion acrylic. Custom hole placement and two hole size options add to its versatility. The LLPX-H Series' new Multi-Drive™ driver allows users to operate the product continuously or in OverDrive™ Strobe mode for that extra burst of intensity. OverDrive operation releases up to ten times the power versus constant operation. Simply set the LED manufacturer's product parameters to the maximum allowed intensity. The built-in Multi-Driver™ also protects the LEDs from premature degradation and failure caused by excessive heat by regulating the current delivered to the LEDs and limiting the duty cycle of the light.
Product Details
- Large LED Light Panel With 30mm Frame Profile
- Driver Built In - No External Wiring To A Driver
- M12 Quick Disconnect
- Edge-Lit LED Panel
- Custom Sizes/Hole Placement Options
- Continuous Operation or OverDrive™ Strobe Mode
Smart Vision Lights LLPX-H65-459x459 Technical Specifications
LLPX-H65-459x459 Continuous Operation Specifications
| Electrical Input | 24VDC +/–5% |
| PNP Line | 2.8 mA @ 4VDC | 8.8 mA @ 12VDC | 17.6 mA @ 24VDC |
| NPN Line | 14.4 mA @ Common (0VDC) |
| OverDriveTM Strobe Mode | Connect pin 5 to GND (see Wiring Configuration for more information) |
| Strobe Duration | Min. 10 μs | Max. 50 ms (see SafeStrobeTM Technology for more information) |
| Duty Cycle | Max. 10% |
| Strobe Input | PNP: +4VDC or greater to activate NPN: GND (<1VDC) to activate |
| Continuous Operation Mode | NPN can be tied to ground OR PNP can be tied to 24VDC (not both) |
| On/Off Input | Not applicable |
| Connection | Not applicable |
| Ambient Temperature | -18º–40º C (0º–104º F) |
| IP Rating | IP50 |
| Compliances | CE, RoHS, IEC 62471 |
| Warranty | 10 year warranty. For complete warranty information, visit smartvisionlights.com/warranty. |
| Input Current | 1.98 A |
| Wattage | 47.52 W |
| Weight | ~5.74 kg |
Smart Vision Lights LLPX-H65-459x459 Technical Specifications
LLPX-H65-459x459 Continuous Operation Specifications
| Electrical Input | 24VDC +/–5% |
| PNP Line | 2.8 mA @ 4VDC | 8.8 mA @ 12VDC | 17.6 mA @ 24VDC |
| NPN Line | 14.4 mA @ Common (0VDC) |
| OverDriveTM Strobe Mode | Connect pin 5 to GND (see Wiring Configuration for more information) |
| Strobe Duration |
Min. 10 μs | Max. 50 ms (see SafeStrobeTM Technology for more information) |
| Duty Cycle | Not applicable |
| Strobe Input | Not applicable |
| Continuous Operation Mode | NPN can be tied to ground OR PNP can be tied to 24VDC (not both) |
| On/Off Input | PNP: +4VDC or greater to activate NPN: GND (<1VDC) to activate |
| Connection | 5-pin M12 connector |
| Ambient Temperature | -18º–40º C (0º–104º F) |
| IP Rating | IP50 |
| Compliances | CE, RoHS, IEC 62471 |
| Warranty | 10 year warranty. For complete warranty information, visit smartvisionlights.com/warranty. |
| Input Current | 1.98 A |
| Wattage | 47.52 W |
| Weight | ~5.74 kg |
Wavelength Colors
Multi-Drive Wiring
Wiring Configuration for CONSTANT ON Operation
Wiring Configuration for STROBE/PULSE Operation
MOUNTING
Smart Vision Lights recommends using drop-in T-nuts for mounting an LLPX-H backlight.
Hardware included with light: (2) M5 x 10 mm screws (hex)
(2) Drop-in T-nuts
CUSTOM SIZES AND HOLE PATTERNS
SVL can customize an LLPX-H to the size you need up to 1000 x 1500 mm. When requesting a custom LLPX-H, include the following: size (length x width) in millimeters, what side the 5-pin M12 connector should be placed on, and desired wavelength (color). Holes can be placed in just about any location on the LLPX-H. When requesting custom hole placement, include number of holes needed, size of holes in millimeters and desired locations If you would like custom sizing or hole placement, please contact sales@machinevisiondirect.com and our staff will help with your customization request.
P.A.L. (PATTERN AREA LIGHTING)
Patterned Area Lighting™ (PAL) is designed to help simplify inspecting specular surface inspection by combining 2D and 3D qualitative methods into one image. PAL lighting features patterns printed directly on the lens, allowing users to quickly and easily detect defects that are nearly impossible to discover otherwise. PAL lighting is best used for phase measuring deflectometry applications, such as looking for chips, dents, scratches, scruffs, and even peeling paint. PAL patterns can be printed on the Diffuse Ring Light Panels. If you would like Pattern Area Lighting, please contact sales@machinevisiondirect.com and our staff will help with your customization request.
LLPX-H65-459x459 Downloads
 |
 |
 |
 |
Possible Product Configurations:
LLPX-H65-459x459-470
LLPX-H65-459x459-530
LLPX-H65-459x459-625
LLPX-H65-459x459-WHI
Estimate shipping
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.