Lead Times
Lead Times are estimated based on standard product lead times, but are subject to change. For the latest product lead times, we always recommend contacting us
Description
JWL225-MD Camera to Light Series Ring Lights
The JWL225-MD, part of the Camera to Light (CTL) Series, is an intense light source meant to provide external illumination for machine vision cameras or smart cameras where the built-in illumination is not enough. This light can be connected directly to camera housings through optional mounting plates to illuminate areas larger than what is normally covered by the camera’s internal light source. The JWL225-MD is compatible with many machine vision cameras and can be directly connected and controlled through a camera’s trigger output.
Smart Vision Lights JWL225-MD Technical Specifications
Continuous Operation SpecificationsElectrical Input | 24VDC +/–5% |
Input Current | 1.4 A Maximum |
Input Power | 34 Watts |
PNP Trigger |
2 mA @ 4 VDC |
NPN Trigger | 9.9 mA @ Common (0VDC) |
Trigger Input | PNP > +3.3 VDC (24 VDC max.) to activate or NPN > GND (<1.4 VDC) to activate (not both) |
Mode Control | Connect pin 5 to 1-10 VDC (10 - 100% output) 24 VDC Maximum |
Strobe Duration | Minimum 30 μs | Maximum ∞ |
Strobe Trigger Latency |
30 μs |
Strobe Frequency |
Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less. |
Duty Cycle | Not Applicable |
Analog Intensity | The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. Intensity limit can be remotely adjusted via SmartVisionLink™ |
Connection | 5-pin M12 connector |
Operating Temperature | -10° - 40° C (14° - 104° F) RH max 80% non-condensing humidity |
Storage Temperature | -20° to 70° C (-4° to 158° F) RH max 80% non-condensing humidity |
IP Rating | IP65 |
Weight | 3.3 pounds | 1.5 kg |
Compliances | CE, IEC-62471, RoHS, UL, CSA, FCC, KCC Pending |
Warranty | 10 Years |
OverDrive™ Operation Specifications
Electrical Input | 24VDC +/–5% |
Input Current | 13 A Peak, During Strobe |
Input Power | 313 Watts Peak, During Strobe |
PNP Trigger |
2 mA @ 4 VDC |
NPN Trigger | 9.9 mA @ Common (0VDC) |
Trigger Input | PNP > +3.3 VDC (24 VDC max.) to activate or NPN > GND (<1.4 VDC) to activate (not both) |
Mode Control | Connect pin 5 to GND |
Strobe Duration | 10 μs Minimum 50 ms Maximum |
Strobe Trigger Latency |
6 μs |
Strobe Frequency |
Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less. |
Duty Cycle | 10% Maximum |
Analog Intensity | The output is adjustable from 10% - 100% of the intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. The intensity limit can be remotely adjusted via SmartVisionLink™ |
Connection | 5-pin M12 connector |
Operating Temperature | -10° - 40° C (14° - 104° F) RH max 80% non-condensing humidity |
Storage Temperature | -20° to 70° C (-4° to 158° F) RH max 80% non-condensing humidity |
IP Rating | IP65 |
Weight | 3.3 pounds | 1.5 kg |
Compliances | CE, IEC-62471, RoHS, UL, CSA, FCC, KCC Pending |
Warranty | 10 Years |
Recommended Illumination Usage: Bright Field, Direct Lighting
Wavelength Colors:
OverDrive™ Operation Wiring:



Continuous Operation Wiring:



JWL225-MD Accessories:
JWL225-MD Downloads:
![]() |
![]() |
Possible Product Configurations:
JWL225-MD-WHI-N10
JWL225-MD-WHI
JWL225-MD-WHI-W30
JWL225-MD-WHI-N10-LPI
JWL225-MD-WHI-LIP
JWL225-MD-WHI-W30-LPI
JWL225-MD-470-N10
JWL225-MD-470
JWL225-MD-470-W30
JWL225-MD-470-N10-LPI
JWL225-MD-470-LPI
JWL225-MD-470-W30-LPI
JWL225-MD-625-N10
JWL225-MD-625
JWL225-MD-625-W30
JWL225-MD-625-N10-LPI
JWL225-MD-625-LPI
JWL225-MD-625-W30-LPI
JWL225-MD-850-N10
JWL225-MD-850
JWL225-MD-850-W30
JWL225-MD-850-N10-LPI
JWL225-MD-850-LPI
JWL225-MD-850-W30-LPI
Estimate shipping
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.