Lead Times
Lead Times are estimated based on standard product lead times, but are subject to change. For the latest product lead times, we always recommend contacting us
Description
- 5 Pin M12 Quick Disconnect
- Driver built in - No External wiring to a driver
- NPN or PNP Signal Options
- Analog Intensity 0-10VDC Signal
- 150mm Dome Diameter
- 30mm Camera Viewing Hole
- Continuous Operation or OverDrive Mode
- Easy mounting with 9 T-slots
Smart Vision Lights DDL-150 Technical Specifications
DDL-150 Continuous Operation Specifications
Electrical Input | 24VDC +/-5% |
Input Current | Max. 1 A |
Wattage | Max. 24 W |
PNP Line | 4 mA @ 4VDC | 10 mA @ 12VDC | 20 mA @ 24VDC |
NPN Line | 15 mA @ ground (0VDC) |
OverDriveTM Strobe Mode | Not applicable |
Strobe Duration | Not applicable |
Duty Cycle | Not applicable |
Strobe Input | Not applicable |
Continuous Operation Mode | NPN can be tied to ground OR PNP can be tied to 24VDC (not both) |
On/Off Input | PNP: +4VDC or greater to activate NPN: GND (<1VDC) to activate |
Connection | 5-pin M12 connector |
Ambient Temperature | -18º–50º C (0º–122º F) |
IP Rating | IP50 |
Weight | 980 g |
Compliances | CE, RoHS, IEC 62471 |
Warranty | 10 years. For complete warranty information, visit smartvisionlights.com/warranty. |
DDL-150 OverDrive Strobe Mode Specifications
Electrical Input | 24VDC +/-5% |
Input Current | Max. 4.1 A |
Wattage | Max. 98 W |
PNP Line | 4 mA @ 4VDC | 10 mA @ 12VDC | 20 mA @ 24VDC |
NPN Line | 15 mA @ ground (0VDC) |
OverDriveTM Strobe Mode | Connect pin 5 to GND (see Wiring Configuration for more information) |
Strobe Duration | Min. 10 μs | Max. 50 ms (see SafeStrobeTM Technology for more information) |
Duty Cycle | Max. 10% |
Strobe Input | PNP: +4VDC or greater to activate NPN: GND (<1VDC) to activate |
Continuous Operation Mode | Not applicable |
On/Off Input | Not applicable |
Connection | 5-pin M12 connector |
Ambient Temperature | -18º–50ºC (0º–122ºF) |
IP Rating | IP50 |
Weight | 980 g |
Compliances | CE, RoHS, IEC 62471 |
Warranty | 10 years. For complete warranty information, visit smartvisionlights.com/warranty. |
DDL Dome Light Series OVERVIEW
The DDL Dome Light Series is designed to read code and imperfections on rounded or highly reflective products and product inspection with an even, uniform, and repeatable light intensity. The DDL Dome Lights feature our Multi-Drive™ controller and built-in driver. The Multi-Drive™ controller combines the Constant ON operation and OverDrive Strobe (high pulse operation) into one easy to use product. The Multi-Drive™ controller allows the user to run the product in Constant ON operation or pulse/strobe the light at the maximum allowed intensity by the LED manufacturer by simply setting the product parameters. The built-in Multi-Drive™ also protects the LEDs from premature degradation and failure caused by excessive heat by regulating the current delivered to the LEDs and limiting the duty cycle of the light.
DDL-150 DOME LIGHT
The DDL-150 Series is a diffuse 6" dome light. The 40 LED design and the constant current regulation the built-in driver provides along with the semi-reflective white dome further backs the DDL-150 light's performance. The DDL-150 was designed with simplicity and functionality in mind. Built-in constant ON operation and OverDrive Strobe technology allows for use in either operation depending on the wiring method. NPN and PNP strobe operation with a built-in 0-10VDC analog intensity control allows for further versatility. The industry-standard 5-pin M12 connector makes for easy installation.
LIGHT OUTPUT CUTAWAY
The dome shape gives this product a particular advantage in uniformity when illuminating and reading OCR codes on reflective or round surfaces.
Wavelength Colors
Multi-Drive Wiring
Wiring Configuration for CONSTANT ON Operation
Wiring Configuration for STROBE/PULSE Operation
MOUNTING
Standard industrial T-slots on each side accepts T-Nuts
Includes (2) T-nuts and (2) screws
(DDL-150 Shown in Image)
OPTIONAL CAMERA BRACKET
The DDL Series offers a specially designed camera mounting bracket and an optional right angle bracket. Multiple adjustment points means maximum mounting versatility between camera manufacturers. Mounting hardware included
Part No: BKT0007
DDL-150 Downloads
Possible Product Configurations:
DDL-150-470
DDL-150-505
DDL-150-530
DDL-150-625
DDL-150-850
DDL-150-WHI
Estimate shipping
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.