ODR130-625-N | ODR130 Overdrive EZ Mount Ring Light (130mm) | 625nm Red Light, Narrow 14 Degree Lens

Smart Vision LightsSKU: ODR130-625-N
Lead Time: 3 Business Days

Price:
Sale price$512.00 USD

Shipping calculated at checkout

This is a Sample Product Title
Was $200.00 Now $100.00
Downloads

Lead Times

Lead Times are estimated based on standard product lead times, but are subject to change. For the latest product lead times, we always recommend contacting us

Description

ODR130 Ring Lights (R80 Pictured)

Product Details

  • 4-5 times brighter than standard high current LEDs
  • SafeStrobe Technology
  • T-Slot for mounting
  • Conversion adapters for different cameras
  • PNP and NPN strobe input
  • Standard with wide lenses
  • Up To 5000 strobes per second
  • Maximum strobe time 125mS
  • Eight, 1mm² die high current LEDs

Smart Vision Lights ODR130 Technical Specifications

ODR130 Continuous Operation Specifications    

Electrical Input 24VDC +/€“5%
Input Current Peak 4 A during strobe
Input Power Peak 96 W during strobe
PNP Trigger 2.8 mA @ 4VDC | 8.8 mA @ 12VDC | 17.6 mA @ 24VDC
NPN Trigger
14.4 mA @ Common (0VDC)
Trigger Input PNP > +4 VDC (24 VDC max.) to activate or NPN ‰¥ GND <1VDC to activate (not both)
Strobe Trigger Latency 6 μs
Strobe Duration Min. 30 us | Max. 125 ms
Strobe Frequency Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less*
Power Indicator Turns green when powered up
Status Indicators Strobe indicator will turn red while resting and turn off when ready
Intensity Limit 270º turn pot. Turn clockwise to increases intensity limit.
Analog Intensity The output is adjustable from 10%€“100% of intensity limit by a 1 €“ 10VDC signal.
Connection 5-pin M12 connector
Operating Temperature -10° to 40° C (14° to 104° F) | RH max 80% non-condensing humidity
Storage Temperature -20° to 70° C (-4° to 158° F) | RH max 80% non-condensing humidity
IP Rating IP50
Weight ~325 g
Compliances CE, RoHS, IEC 62471
Warranty UV LEDs have a 2 year warranty, all other LEDs have a 10 year warranty.
For complete warranty information, visit smartvisionlights.com/warranty.

 

All EZ Mount LED Ring Light Mount Directly to a Camera Lens
The EZ Mount LED Ring Light can be quickly and easily adapted to any vision system with either of four standard mounting options. First, there is a standard M46 thread protruding from the back of the EZ Mount LED Ring Light. Using readily available step-up or step-down rings it can be mounted directly to the threads found on the front end of most lenses. Second is the ability to mount the lens at the front end of the EZ Mount LED Ring Light. Once again, an off-the-shelf step up or step down adapter ring can be used to adapt lenses with M43 or smaller filter mounting threads. A flange at the front end of the EZ Mount LED Ring Light holds the step ring with three set screws, and the camera lens is inserted through the center of the EZ Mount LED Ring Light and threaded onto the step ring. In those few cases where the lens's locking thumbscrews may prevent the lens from fitting through the center of the EZ Mount LED Ring Light, extra low-profile replacement set screws are included, allowing the protruding thumbscrews to be removed. Step up and Step down adapter rings are not included with the light. Third is a T-slot on all sides. Standard industrial T-nuts can be dropped into the slot for mounting. Fourth way to mount the light is using the threaded M4 holes on the back plate of light. The EZ Mount LED Ring Light are a high output LED light in an aluminum housing. Housing uses industry standard T-Slots for ease of mounting. Ring Lights are available in light output of White, Red, Amber, Blue, Green, Cyan, IR and UV. Ring Light includes an integrated constant current driver with a built in strobe input with option for PNP or NPN trigger control. No need for an external driver to control the light. The integrated driver also includes variable light intensity control. Light can be controlled by a manual potentiometer or a 0-10VDC analog signal.

ODR130 RING LIGHT OVERVIEW
The all metal construction of the Ring Light Series of lights provides a small particle resistant and all around durable light. Its simple plug and play 5 Pin M12 connector allows for ease of use while allowing for full control. The 0-10 VDC intensity control assists in gaining full control of the light output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kits adapters. The ODR130-16 Series of ring light features an Overdrive driver with NPN or PNP signal options.

Wavelength Colors
ODR130 Wavelength Colors Smart Vision Lights

WIRING
MOUNTING USING THREAD ADAPTERS
Thread Adapters (Or Direct to Camera Mount Adapters) are both available for mounting the EZ Mount Ring Lights directly to your lens or camera body. Please Reference the Datasheet for your respective lens to confirm thread size prior to ordering a thread adapter. Direct to Camera Mount Adapters are also thread adapters that mount the light directly to the body of your camera.


ODR130 Downloads 

ODR130 Datasheet | Smart Vision Lights ODR130 3D STEP Model | Smart Vision Lights
ODR130 2D DXF Drawing | Smart Vision Lights ODR130 PDF Dimension Drawing | Smart Vision Lights

 

Possible Product Configurations:
ODR130-365
ODR130-395
ODR130-470
ODR130-505
ODR130-530
ODR130-625
ODR130-850
ODR130-940
ODR130-WHI
ODR130-365-N
ODR130-395-N
ODR130-470-N
ODR130-505-N
ODR130-530-N
ODR130-625-N
ODR130-850-N
ODR130-940-N
ODR130-WHI-N

Estimate shipping

Payment & Security

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed