Lead Times
Lead Times are estimated based on standard product lead times, but are subject to change. For the latest product lead times, we always recommend contacting us
Descripción
MBL Mini Backlights
The MBL Series of backlights is a mini back light with an ultra-slim design. Edge-enhancing technology is built-in to provide maximum contrast to backlit objects, providing the ability to get sharp images of round and highly reflective objects. The MBL Series is a Multi-Drive™ light capable of being adjusted remotely from a smartphone or tablet through SmartVisionLink.
MBL mini backlights provide a high density of LED’s with an active area ranging from 25 x 25 mm to 100 x 100 mm. The integrated constant current Multi-Drive™ LED driver simplifies installation and use while delivering either constant or strobe operation. And with a surface illuminance of up to 190,000 lux in continuous mode and 2,180,000 lux in OverDrive™, these are seriously bright backlights.
Give yourself an edgeBuilt-in edge enhancing technology provides collimated lighting for uniform, consistent light. Get excellent edge contrast for shiny parts and curved edges while improving overall image clarity.
Product Details
- Built-in Multi-Drive Driver
- 24VDC
- NPN and PNP Strobe
- Blue 470nm, Red 625nm, IR 850nm and White available standard
- Analog intensity 0-10VDC signal
Smart Vision Lights MBL-25x25 Technical Specifications
MBL-25x25 Continuous Operation Specifications
Electrical Input | 24 VDC +/- 5% |
Input Current |
MBL-25x25 | Max 0.20 A |
Input Power |
MBL-25x25 | Max 4.8 W |
PNP Trigger | 2.0 @ 4 VDC | 7.0 mA @ 12 VDC | 13.4 mA @ 24 VDC |
NPN Trigger | 12 mA @ Common (0VDC) |
Trigger Input |
PNP > +3.3 VDC (24 VDC max.) to activate or NPN > GND (<1VDC) to activate (not both) |
Strobe Duration | Min. 30 μs | Max. ∞ |
Strobe Trigger Latency | 10 μs |
Duty Cycle | Not Applicable |
Analog Intensity | The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. Intensity can be remotely adjusted via SmartVisionLink™ |
Connection | 5-pin M12 connector |
Operating Temperature | -10° to 40° C (14° to 104° F) | RH max 80% non-condensing humidity |
Storage Temperature | -20° to 70° C ( -4° to 158° F) | RH max 80% non-condensing humidity |
IP Rating | IP50 |
Weight |
MBL-25x25 | ~0.25 lbs (0.10 kgs) |
Compliances | FCC, CE, CSA, KC, UL61010, RoHS, REACH, WEEE, IEC 62471 |
Warranty | 10 years |
MBL-25x25 Strobe Operation Specifications
Electrical Input | 24 VDC +/- 5% |
Input Current |
MBL-25x25 | Max 0.23 A |
Input Power |
MBL-25x25 | Max 7.2 W |
PNP Trigger | 2.0 @ 4 VDC | 7.0 mA @ 12 VDC | 13.4 mA @ 24 VDC |
NPN Trigger | 12 mA @ Common (0VDC) |
Trigger Input |
PNP > +3.3 VDC (24 VDC max.) to activate or NPN > GND (<1VDC) to activate (not both) |
Strobe Duration | Min. 30 μs | Max. 50ms |
Strobe Frequency | Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less. |
Strobe Trigger Latency | 6 μs |
Duty Cycle | Not Applicable |
Analog Intensity | The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. Intensity can be remotely adjusted via SmartVisionLink™ |
Connection | 5-pin M12 connector |
Operating Temperature | -10° to 40° C (14° to 104° F) | RH max 80% non-condensing humidity |
Storage Temperature | -20° to 70° C ( -4° to 158° F) | RH max 80% non-condensing humidity |
IP Rating | IP50 |
Weight |
MBL-25x25 | ~0.25 lbs (0.10 kgs) |
Compliances | FCC, CE, CSA, KC, UL61010, RoHS, REACH, WEEE, IEC 62471 |
Warranty | 10 years |
Smart Vision Link
With integrated SmartVisionLink™, the LSR300 can be used with Smart Vision Light’s Bluetooth module (BTM-1000*). Users can install the SmartVisionLink™ app on Android or Apple phones and tablets to configure lighting parameters for each of the four lighting zones. Zone parameters include 10-100% intensity for both continuous and OverDrive™ strobe modes, as well as zone-disable. After parameters are set and saved, the BTM-1000 can be removed from the LSR300 and settings will be retained in LSR300E’s static memory. The SmartVisionlink™ app is available at no cost from the Google Play Store or Apple’s App Store. |
*The BTM-1000 is sold separately.
Available Wavelengths
Multi-Drive Wiring
Wiring Configuration for CONSTANT ON Operation
Wiring Configuration for STROBE/PULSE Overdrive Operation
MBL-25x25 Downloads
Possible Product Configurations:
MBL-25x25-470
MBL-25x25-625
MBL-25x25-850
MBL-25x25-WHI
Gastos estimados de envío
Payment & Security
Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.