LM75-530-W | LM75 Mini Linear Light | 530nm Green Light, Wide 80 Degree Lens

Smart Vision LightsSKU: LM75-530-W
Lead Time: 3 Business Days

Precio:
Precio de venta$441.00 USD

Gastos de envío calculados en la caja

This is a Sample Product Title
Was $200.00 Now $100.00
Downloads

Lead Times

Lead Times are estimated based on standard product lead times, but are subject to change. For the latest product lead times, we always recommend contacting us

Descripción

Smart Vision Lights LM75 Mini Linear Light

The Smart Vision Lights (SVL) LM75 Mini Linear Light features a built in driver which includes Multi-Drive capabilities. Multi-Drive allows the user to operate this light in constant ON operation or OverDrive (High-Intensity Strobe) operation. The industry standard 5 Pin M12 connector makes for simple wiring and the multiple lensing options gives this light a broad spectrum of illumination area. The 0-10V analog control gives the user total control over intensity.

Product Details

  • Driver Built In - No External Wiring To A Driver
  • 5 Pin M12 Quick Disconnect Cable
  • Over-Current Protection
  • PNP and NPN Strobe Input
  • Continuous Operation or Strobe Mode
  • (8) High Output LEDs

Smart Vision Lights smallest, most compact linear lights are the mini LED linear lights. (LM Family). These lights are extremely bright and available in multiple wavelengths to meet your application needs.

Smart Vision Lights LM75 Technical Specifications

LM75 Continuous Operation Specifications

Electrical Input 24 VDC +/- 5%
Input Current Max. 275 mA
Input Power Max. 6.6 W
PNP Trigger 2.8 mA @ 4 VDC | 8.8 mA @ 12 VDC | 17.6 mA @ 24VDC
NPN Trigger 14.4 mA @ Common (0VDC)
Trigger Input PNP > +4 VDC (24 VDC max.) to activate or NPN > GND (<1VDC) to activate (not both)
Mode Control Connect pin 5 to 1-10 VDC (10 - 100% output); 24 VDC (Max)
Strobe Duration Min. 30 μs | Max. ˆž
Strobe Trigger Latency 10 μs
Strobe Frequency Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less.1
Duty Cycle Not applicable
Analog Intensity The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity.
Connection 5-pin M12 connector
Operating Temperature -10° to 40° C (14° to 104° F) | RH max 80% non-condensing humidity
Storage Temperature -20° to 70° C ( -4° to 158° F) | RH max 80% non-condensing humidity
IP Rating IP65
Weight ~0.28 lb | ~128 g
Compliances CE, IEC-62471, RoHS
Warranty 10 years2

 

LM75 OverDrive Operation Specifications

Electrical Input 24 VDC +/- 5%
Input Current Peak 3.1 A
Input Power Peak 74.4 W
PNP Trigger 2.8 mA @ 4 VDC | 8.8 mA @ 12 VDC | 17.6 mA @ 24VDC
NPN Trigger 14.4 mA @ Common (0VDC)
Trigger Input PNP > +4 VDC (24 VDC max.) to activate or NPN > GND (<1VDC) to activate (not both)
Mode Control Connect pin 5 to GND (See wiring configuration for more information)
Strobe Duration Min. 30 μs | Max. 50 ms
Strobe Trigger Latency 6 μs
Strobe Frequency Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less.1
Duty Cycle Max. 10%1
Analog Intensity The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity.
Connection 5-pin M12 connector
Operating Temperature -10° to 40° C (14° to 104° F) | RH max 80% non-condensing humidity
Storage Temperature -20° to 70° C ( -4° to 158° F) | RH max 80% non-condensing humidity
IP Rating IP65
Weight ~0.28 lb | ~128 g
Compliances CE, IEC-62471, RoHS
Warranty 10 years2

 

Multi-Drive

The Multi-Drive controller combines the Constant ON operation and OverDrive Strobe (high pulse operation) into one easy to use product. The Multi-Drive controller allows the user to run the product in Constant ON operation or pulse/strobe the light at the maximum allowed intensity by the LED manufacturer by simply setting the product parameters. The built-in Multi-Drive also protects the LEDs from premature degradation and failure caused by excessive heat by regulating the current delivered to the LEDs and limiting the duty cycle of the light.

Wavelength Colors
Smart Vision Lights LM45 Mini Linear Bar Light Wavelength

Multi-Drive Wiring
Wiring Configuration for CONSTANT ON Operation
Wiring Configuration for STROBE/PULSE Operation

MOUNTING
Mounting is done by use of the rear T-slot mount
Includes (2) M4x16 screws and (2) M4 nylon nuts

LM75 Downloads 

LM75 Datasheet | Smart Vision Lights LM75 3D STEP Model | Smart Vision Lights
LM75 2D DXF Drawing | Smart Vision Lights LM75 PDF Dimension Drawing | Smart Vision Lights

 

Possible Product Configurations:

LM75-470
LM75-530
LM75-625
LM75-850
LM75-WHI
LM75-470-N16
LM75-530-N16
LM75-625-N16
LM75-850-N16
LM75-WHI-N16
LM75-470-N25
LM75-530-N25
LM75-625-N25
LM75-850-N25
LM75-WHI-N25
LM75-470-L
LM75-530-L
LM75-625-L
LM75-850-L
LM75-WHI-L
LM75-470-W
LM75-530-W
LM75-625-W
LM75-850-W
LM75-WHI-W

Gastos estimados de envío

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

You may also like

Recently viewed