LLPX-H65-306x306-WHI | LLPX-H65-306x306 Edge Lit Large Ring Light with 65mm Hole (12" x 12") | White Light

Smart Vision LightsSKU: LLPX-H65-306x306-WHI
Lead Time: 3 Business Days

Precio:
Precio de venta$1,177.00 USD

Gastos de envío calculados en la caja

This is a Sample Product Title
Was $200.00 Now $100.00
Downloads

Lead Times

Lead Times are estimated based on standard product lead times, but are subject to change. For the latest product lead times, we always recommend contacting us

Descripción

LLPX Series - Light Tent or Dome Type of illumination The LLPX-H Series is Smart Vision Lights second generation of LLP-H ring light panels that allows for more intensity with the same familiar ease of mounting. A new optically clear internal light dispersion grid and matte white-finished backing plate allow more light to reflect up and out through the diffusion acrylic. Custom hole placement and two hole size options add to its versatility. The LLPX-H Series new Multi-Drive™ driver allows users to operate the product continuously or in OverDrive™ Strobe mode for that extra burst of intensity. OverDrive operation releases up to ten times the power versus constant operation. Simply set the LED manufacturer's product parameters to the maximum allowed intensity. The built-in Multi-Driver™ also protects the LEDs from premature degradation and failure caused by excessive heat by regulating the current delivered to the LEDs and limiting the duty cycle of the light.

Product Details

  • Large LED Light Panel With 30mm Frame Profile
  • Driver Built In - No External Wiring To A Driver
  • M12 Quick Disconnect
  • Edge-Lit LED Panel
  • Custom Sizes/Hole Placement Options
  • Continuous Operation or OverDrive™ Strobe Mode

Smart Vision Lights LLPX-H65-306x306 Technical Specifications

LLPX-H65-306x306 Continuous Operation Specifications

Electrical Input 24VDC +/5%
PNP Line 2.8 mA @ 4VDC | 8.8 mA @ 12VDC | 17.6 mA @ 24VDC
NPN Line 14.4 mA @ Common (0VDC)
OverDriveTM Strobe Mode Connect pin 5 to GND (see Wiring Configuration for more information)
Strobe Duration Min. 10 μs | Max. 50 ms (see SafeStrobeTM Technology for more information)
Duty Cycle Max. 10%
Strobe Input PNP: +4VDC or greater to activate NPN: GND (<1VDC) to activate
Continuous Operation Mode NPN can be tied to ground OR PNP can be tied to 24VDC (not both)
On/Off Input Not applicable
Connection Not applicable
Ambient Temperature -18º–40º C (0º–104º F)
IP Rating IP50
Compliances CE, RoHS, IEC 62471
Warranty 10 year warranty. For complete warranty information, visit smartvisionlights.com/warranty.
Input Current 1.26 A
Wattage 30.24 W
Weight ~3.08 kg

 

LLPX-H65-306x306 Continuous Operation Specifications

Electrical Input 24VDC +/5%
PNP Line 2.8 mA @ 4VDC | 8.8 mA @ 12VDC | 17.6 mA @ 24VDC
NPN Line 14.4 mA @ Common (0VDC)
OverDriveTM Strobe Mode Connect pin 5 to GND (see Wiring Configuration for more information)
Strobe Duration Min. 10 μs | Max. 50 ms
(see SafeStrobe
TM Technology for more information)
Duty Cycle Not applicable
Strobe Input Not applicable
Continuous Operation Mode NPN can be tied to ground OR PNP can be tied to 24VDC (not both)
On/Off Input PNP: +4VDC or greater to activate NPN: GND (<1VDC) to activate
Connection 5-pin M12 connector
Ambient Temperature -18º–40º C (0º–104º F)
IP Rating IP50
Compliances CE, RoHS, IEC 62471
Warranty 10 year warranty. For complete warranty information, visit smartvisionlights.com/warranty.
Input Current 1.26 A
Wattage 30.24 W
Weight ~3.08 kg

 

Wavelength Colors

LLPX Wavelength Colors

 Multi-Drive Wiring
Wiring Configuration for CONSTANT ON Operation
Wiring Configuration for STROBE/PULSE Operation
MOUNTING
Smart Vision Lights recommends using drop-in T-nuts for mounting an LLPX-H backlight.
Hardware included with light: (2) M5 x 10 mm screws (hex)
(2) Drop-in T-nuts

CUSTOM SIZES AND HOLE PATTERNS
SVL can customize an LLPX-H to the size you need - up to 1000 x 1500 mm. When requesting a custom LLPX-H, include the following: size (length x width) in millimeters, what side the 5-pin M12 connector should be placed on, and desired wavelength (color). Holes can be placed in just about any location on the LLPX-H. When requesting custom hole placement, include number of holes needed, size of holes in millimeters and desired locations If you would like custom sizing or hole placement, please contact sales@machinevisiondirect.com and our staff will help with your customization request.

P.A.L. (PATTERN AREA LIGHTING)
Patterned Area Lighting™ (PAL) is designed to help simplify inspecting specular surface inspection by combining 2D and 3D qualitative methods into one image. PAL lighting features patterns printed directly on the lens, allowing users to quickly and easily detect defects that are nearly impossible to discover otherwise. PAL lighting is best used for phase measuring deflectometry applications, such as looking for chips, dents, scratches, scruffs, and even peeling paint. PAL patterns can be printed on the Diffuse Ring Light Panels. If you would like Pattern Area Lighting, please contact sales@machinevisiondirect.com and our staff will help with your customization request.

 

LLPX-H65-306x306 Downloads 

LLPX-H65-306x306 Datasheet | Smart Vision Lights LLPX-H65-306x306 3D STEP Model | Smart Vision Lights
LLPX-H65-306x306 2D DXF Drawing | Smart Vision Lights LLPX-H65-306x306 PDF Dimension Drawing | Smart Vision Lights

 

Possible Product Configurations:
LLPX-H65-306x306-470
LLPX-H65-306x306-530
LLPX-H65-306x306-625
LLPX-H65-306x306-WHI

Gastos estimados de envío

Payment & Security

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Visa

Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

You may also like

Recently viewed