Lead Times
Lead Times are estimated based on standard product lead times, but are subject to change. For the latest product lead times, we always recommend contacting us
Descripción
JWL225-MD Camera to Light Series Ring Lights
The JWL225-MD, part of the Camera to Light (CTL) Series, is an intense light source meant to provide external illumination for machine vision cameras or smart cameras where the built-in illumination is not enough. This light can be connected directly to camera housings through optional mounting plates to illuminate areas larger than what is normally covered by the camera€™s internal light source. The JWL225-MD is compatible with many machine vision cameras and can be directly connected and controlled through a camera€™s trigger output.
Smart Vision Lights JWL225-MD Technical Specifications
Continuous Operation SpecificationsElectrical Input | 24VDC +/€“5% |
Input Current | 1.4 A Maximum |
Input Power | 34 Watts |
PNP Trigger |
2 mA @ 4 VDC |
NPN Trigger | 9.9 mA @ Common (0VDC) |
Trigger Input | PNP > +3.3 VDC (24 VDC max.) to activate or NPN > GND (<1.4 VDC) to activate (not both) |
Mode Control | Connect pin 5 to 1-10 VDC (10 - 100% output) 24 VDC Maximum |
Strobe Duration | Minimum 30 μs | Maximum ˆž |
Strobe Trigger Latency |
30 μs |
Strobe Frequency |
Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less. |
Duty Cycle | Not Applicable |
Analog Intensity | The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. Intensity limit can be remotely adjusted via SmartVisionLink |
Connection | 5-pin M12 connector |
Operating Temperature | -10° - 40° C (14° - 104° F) RH max 80% non-condensing humidity |
Storage Temperature | -20° to 70° C (-4° to 158° F) RH max 80% non-condensing humidity |
IP Rating | IP65 |
Weight | 3.3 pounds | 1.5 kg |
Compliances | CE, IEC-62471, RoHS, UL, CSA, FCC, KCC Pending |
Warranty | 10 Years |
OverDrive Operation Specifications
Electrical Input | 24VDC +/€“5% |
Input Current | 13 A Peak, During Strobe |
Input Power | 313 Watts Peak, During Strobe |
PNP Trigger |
2 mA @ 4 VDC |
NPN Trigger | 9.9 mA @ Common (0VDC) |
Trigger Input | PNP > +3.3 VDC (24 VDC max.) to activate or NPN > GND (<1.4 VDC) to activate (not both) |
Mode Control | Connect pin 5 to GND |
Strobe Duration | 10 μs Minimum 50 ms Maximum |
Strobe Trigger Latency |
6 μs |
Strobe Frequency |
Max 4 kHz or 1 / Duty Cycle as calculated, whichever is less. |
Duty Cycle | 10% Maximum |
Analog Intensity | The output is adjustable from 10% - 100% of the intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity. The intensity limit can be remotely adjusted via SmartVisionLink |
Connection | 5-pin M12 connector |
Operating Temperature | -10° - 40° C (14° - 104° F) RH max 80% non-condensing humidity |
Storage Temperature | -20° to 70° C (-4° to 158° F) RH max 80% non-condensing humidity |
IP Rating | IP65 |
Weight | 3.3 pounds | 1.5 kg |
Compliances | CE, IEC-62471, RoHS, UL, CSA, FCC, KCC Pending |
Warranty | 10 Years |
Recommended Illumination Usage: Bright Field, Direct Lighting
Wavelength Colors:
OverDrive Operation Wiring:



Continuous Operation Wiring:



JWL225-MD Accessories:
JWL225-MD Downloads:
![]() |
![]() |
Possible Product Configurations:
JWL225-MD-WHI-N10
JWL225-MD-WHI
JWL225-MD-WHI-W30
JWL225-MD-WHI-N10-LPI
JWL225-MD-WHI-LIP
JWL225-MD-WHI-W30-LPI
JWL225-MD-470-N10
JWL225-MD-470
JWL225-MD-470-W30
JWL225-MD-470-N10-LPI
JWL225-MD-470-LPI
JWL225-MD-470-W30-LPI
JWL225-MD-625-N10
JWL225-MD-625
JWL225-MD-625-W30
JWL225-MD-625-N10-LPI
JWL225-MD-625-LPI
JWL225-MD-625-W30-LPI
JWL225-MD-850-N10
JWL225-MD-850
JWL225-MD-850-W30
JWL225-MD-850-N10-LPI
JWL225-MD-850-LPI
JWL225-MD-850-W30-LPI
Gastos estimados de envío
Payment & Security
Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.