Description
MV-ACC-01-2101-3m Hirose Cable
This is a 3m length Hirose to Flying Lead Cable manufactured by HIKROBOT for use in Machine Vision Applications.
This Item is Stocked in the US at Machine Vision Direct's Illinois Warehouse
Cable Pinout*
PIN |
Wire Color |
Signal |
Description |
1 | Orange | 12 V | DC 12 V |
2 | Yellow | Opt-Iso In | Opto Isolated Input |
3 | Purple | GPIO | Configurable Input or Output |
4 | Blue | Opt-Iso Out | Opto Isolated Output |
5 | Green | I/O Ground | Opto Isolated I/O Ground |
6 | Gray | Gnd | Power and GPIO Ground |
Physical Specifications
Camera Side Connector | Hirose 6 Pin (HR10A-7P-6S) |
Host-Side Connector | Flying Leads (Open Ends) |
Cable Cross Section | 26 AWG |
Cable Diameter | 5.0 mm |
Cable Insulation Material | PVC |
Outer Jacket | PVC |
Cable Color | Black |
Minimum Bend Radius | 50mm |
Maximum Bend Cycles | 400 Times |
Electrical Specifications
Maximum Operating Voltage | 30 V |
Cable Resistance | ≤150 Ω/km |
Environmental Specifications
Operating Temperature Range |
-10 Deg C to 80 Deg C (14 Deg F to 176 Deg F) |
Plug Specifications
Durability | >1000 Mating Cycles |
Contact Resistance | 10 mΩ |
Contact Plating | Silver |
Plug Insulation material | Polyamide |
Compliance
ROHS Compliant | Yes |
UL Compliant | Yes |
Cable Dimension Drawing
Downloads
*Read the user manual for the camera including the precautions before connecting the cable to the camera. The user manual also contains further information about pin assignments, power requirements, as well as comprehensive information about installing and using the camera.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.