RM75 Mini Ring Lights
Multi-Zone Ring Lights are designed for compact 3D photometric stereo applications. Compact and powerful, the low-angle mini ring lights work best for dark-field ring applications and radial illumination lighting configurations.
Multi-Zone Ring Lights are sold in kits with the 4ZMD four-channel LED driver, which permits control of up to four separate lights or light zones, either independently or simultaneously, in any combination and at any intensity level. The 4ZMD strobes the lights independently for photometric and multi-light applications.
When connected to SVL’s new programmable LED Light Manager (LLM), each channel of the Multi-Zone Ring lights can be set to continuous on, off, or any intensity level in between, as well as OverDrive™ strobe mode.
The compact and powerful RM75-4Z Mini Ring Light is a low-angle ring light that works best for dark field ring applications. The light can also be used for radial illumination. The RM75-4Z has four zones, making it a quadrant light that can have each individual zone controlled independently of one another.
4ZMD - The 4ZMD is an external driver that permits control of up to four separate light zones either independently or simultaneously, in any combination. The 4ZMD has independent intensity controls and built-in Multi-Drive™, allowing a range to be set from 10%–100% for continuous operation or OverDrive™ strobe mode.
Recommended illumination usage: Dark Field, Radial
This is a kit that consists of
- (1) 75mm O.D. x 52mm I.D. (3''x2'') Tapered Ring Light- 4 Zones
(1) 4ZMD-100 External Driver
- (2) M4 x 8 mm screws (hex)
- (2) M5 x 10 mm screws (hex)
- (2) T-nuts
- Independently control four individual zones built into a single light
- Sold with the 4ZMD, which allows for continuous operation or OverDrive™ strobe mode for each channel
- Built-in individual intensity control channels for either continuous operation or OverDrive™ strobe mode
- PNP high-speed strobe input
- Built-in over current-protection
- 5-pin M12 quick connect (reverse-key)
MOUNTING USING ADP0001-KIT MOUNTING BRACKET
The RM75 and RMX75 lights may also be mounted using the ADP0001-KIT mounting plate and optional thread adapters. To mount with this method, the ADP0001-KIT mounting bracket must be purchased. The ADP0001-KIT bolts to the rear of the light and has an M46 thread in its center. A Step Up or Step Down thread adapter must then be purchased to adapt your lens or camera to this M46 Thread. Please reference the datasheet for your light or camera in order to determine the appropriate thread adapter to purchase. MOUNTING USING T-NUTS
Mounting options include four (4) T-slots & four (4) M4 threaded holes.
(2) M4x16 screws
(2) M4 nylon nuts
Possible Product Configurations:
Payment & Security
Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.