RD80 Diffused EZ Mount Ring Light (80mm)

Smart Vision LightsSKU: RD80-WHI
Lead Time: 3 Business Days

Color: WHITE
Precio:
Precio de venta$454.00 USD

Gastos de envío calculados en la caja

This is a Sample Product Title
Was $200.00 Now $100.00
Downloads

Lead Times

Lead Times are estimated based on standard product lead times, but are subject to change. For the latest product lead times, we always recommend contacting us

Descripción

RD80 Ring Lights Product Details

The RD80 is the same as the R80 Ring Light from Smart Vision Lights with the addition of an integrated Diffuser.

  • T-Slot for mounting
  • Conversion adapters for different cameras
  • PNP and NPN strobe input
  • Continuous operation or strobe mode
  • Dimmable via built in potentiometer
  • Analog intensity 0-10VDC signal
  • Four, 1mm² die high current LEDs

 

Smart Vision Lights RD80 Technical Specifications

RD80 Continuous Operation Specifications

Electrical Input 24VDC +/5%
Input Current Max. 350 mA
Wattage Max. 8.4W
Strobe Input PNP > +4VDC or greater to activate | NPN > GND (<1VDC) to activate
PNP Line 4 mA @ 4VDC | 10 mA @ 12VDC | 20 mA @ 24VDC
NPN Line 15 mA @ ground (0VDC)
Yellow Indicator LED LED Strobe Indicator ON = Light Active
Green Indicator LED ON = Power
Continuous Mode NPN can be tied to ground OR PNP can be tied to 24VDC (not both)
Potentiometer 270º turn pot intensity control of 10%100%. Turn clockwise to increases intensity.
Analog Intensity The output is adjustable from 10%100% of brightness by a 1–10VDC signal. (Jumpering pin 5 to pin 1 will provide maximum intensity.)
Connection 5-pin M12 connector
Ambient Temperature -18º–40ºC (0º–104ºF)
Ip Rating  IP50
Weight ~183 g
Compliances CE, RoHS, IEC 62471
Warranty 10 years. For complete warranty information, visit smartvisionlights.com/warranty.

 

All EZ Mount LED Ring Light Mount Directly to a Camera Lens
The EZ Mount LED Ring Light can be quickly and easily adapted to any vision system with either of four standard mounting options. First, there is a standard M46 thread protruding from the back of the EZ Mount LED Ring Light. Using readily available step-up or step-down rings it can be mounted directly to the threads found on the front end of most lenses. Second is the ability to mount the lens at the front end of the EZ Mount LED Ring Light. Once again, an off-the-shelf step up or step down adapter ring can be used to adapt lenses with M43 or smaller filter mounting threads. A flange at the front end of the EZ Mount LED Ring Light holds the step ring with three set screws, and the camera lens is inserted through the center of the EZ Mount LED Ring Light and threaded onto the step ring. In those few cases where the lens's locking thumbscrews may prevent the lens from fitting through the center of the EZ Mount LED Ring Light, extra low-profile replacement set screws are included, allowing the protruding thumbscrews to be removed. Step up and Step down adapter rings are not included with the light. Third is a T-slot on all sides. Standard industrial T-nuts can be dropped into the slot for mounting. Fourth way to mount the light is using the threaded M4 holes on the back plate of light. The EZ Mount LED Ring Light are a high output LED light in an aluminum housing. Housing uses industry standard T-Slots for ease of mounting. Ring Lights are available in light output of White, Red, Amber, Blue, Green, Cyan, IR and UV. Ring Light includes an integrated constant current driver with a built in strobe input with option for PNP or NPN trigger control. No need for an external driver to control the light. The integrated driver also includes variable light intensity control. Light can be controlled by a manual potentiometer or a 0-10VDC analog signal.

RD80 RING LIGHT OVERVIEW
The all-metal construction of the Ring Light Series of lights provides a small particle resistant and all-around durable light. Its simple plug-and-play 5 Pin M12 connector allows for ease of use while allowing for full control. The 0-10 VDC intensity control assists in gaining full control of the light output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kits adapters. The RD80 operates with either an NPN or a PNP signal and runs on an industry standard 24 VDC.

Wavelength Colors
R80 Wavelength Colors Smart Vision Lights

WIRING

MOUNTING USING THREAD ADAPTERS
Thread Adapters (Or Direct to Camera Mount Adapters) are both available for mounting the EZ Mount Ring Lights directly to your lens or camera body. Please Reference the Datasheet for your respective lens to confirm thread size prior to ordering a thread adapter. Direct to Camera Mount Adapters are also thread adapters that mount the light directly to the body of your camera.

RD80 Downloads 

R80 Datasheet | Smart Vision Lights R80 3D STEP Model | Smart Vision Lights
R80 2D DXF Drawing | Smart Vision Lights R80 PDF Dimension Drawing | Smart Vision Lights

 

Possible Product Configurations:
RD80-365
RD80-395
RD80-470
RD80-505
RD80-530
RD80-625
RD80-850
RD80-940
RD80-WHI

Gastos estimados de envío

Payment & Security

American Express Apple Pay Diners Club Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

You may also like

Recently viewed