Smart Vision Lights - Bright Field RING LIGHTS
SVL Bright Field Ring Lights Overview
Bright Field Ring Lights are a variety of Ring Light with an angle of incidence with the inspected surface of 45 Degrees or more. Bright Field Ring Lights will generally show flat inspected surfaces as bright. However, these lights can also create hot spots when used with reflective surfaces. The convenient ability to mount many bright field ring lights to the same structure as the camera (and many times to the camera or camera lens itself) makes ring lights amongst the most popular illuminators amongst machine vision inspections.
Bright Field Rings Lights are helpful for Bright Field Illumination techniques.
JWL150-MD Camera to Light Series Ring Light
The JWL150 is an intense, compact light source to provide external illumination for machine vision cameras or smart cameras where the built-in illumination is not enough. Connect the JWL150 directly to camera housings through optional mounting plates to get the light you need in a small footprint. The JWL is compatible with many machine vision cameras and can be directly connected and controlled through a camera’s trigger output.
Specifications
Constant On: Yes
Strobe: Yes
Strobe Overdrive: Yes
Dimmable: Yes
Size:
Driver: MultiDrive
IP Rating: IP65
Wavelengths: White, 470nm, 625nm, 850nm
JWL150-DO Lightgistics Dual OverDrive Ring Light
The JWL150-DO is an OverDriveTM-only light source meant to provide external illumination for logistics. This light can be mounted to camera housings through optional mounting plates. The JWL150-DO is compatible with most common major machine vision cameras and can be directly connected and controlled through a camera’s trigger output. Specially designed onboard charging capacitors ensure powerful bursts of energy with a low consistent electrical draw.
Specifications
Constant On: No
Strobe: Yes
Strobe Overdrive: Yes
Dimmable: During Deca OverDrive
Size:
Driver: Dual OverDrive
IP Rating: IP65
Wavelengths: White, 625nm
JWL225-MD Camera to Light Series Ring Light
The JWL225-MD, part of the Camera to Light (CTL) Series, is an intense light source meant to provide external illumination for machine vision cameras or smart cameras where the built-in illumination is not enough. This light can be connected directly to camera housings through optional mounting plates to illuminate areas larger than what is normally covered by the camera’s internal light source. The JWL225-MD is compatible with many machine vision cameras and can be directly connected and controlled through a camera’s trigger output.
Specifications
Constant On: Yes
Strobe: Yes
Strobe Overdrive: Yes
Dimmable: Yes
Size:
Driver: MultiDrive
IP Rating: IP65
Wavelengths: White, 470nm, 625nm, 850nm
JWL225-DO Lightgistics Series OverDrive Ring Light
The JWL225-DO is an OverDriveT only light source meant to provide external illumination for logistics. The JWL225-DO is compatible with most common major machine vision cameras and can be directly connected and controlled through a camera’s trigger output.
Specifications
Constant On: No
Strobe: Yes
Strobe Overdrive: Yes
Dimmable: During Deca OverDrive
Size:
Driver: Dual OverDrive
IP Rating: IP65
Wavelengths: White, 625nm
RHI200-DO Lightgistics High Intensity OverDrive Ring Light
The RHI200-DO is an OverDriveTM only light source meant to provide external illumination for logistics. The RHI200-DO is a high intensity ring light that can be used with long working distances and features optional mounting brackets for most major machine vision cameras. Our specially designed onboard charging capacitors ensure powerful bursts of energy with a low consistent electrical draw.
Specifications
Constant On: No
Strobe: Yes
Strobe Overdrive: Yes
Dimmable: During Deca OverDrive
Size:
Driver: Dual OverDrive
IP Rating: IP65
Wavelengths: White, 625nm
RMX75 Bright Field Silicone Lens Mini Ring Light
Offering an ideal working distance of 100-500 mm, the RMX75 Mini Ring Light Series is specifically engineered for radial and bright field applications. The light’s silicone lens provides an extra-tight seal and IP65 rating. The RMX75 features an integrated Multi-Drive™ constant current driver that operates in continuous operation or OverDrive strobe mode depending on the wiring method.
Specifications
Constant On: Yes
Strobe: Yes
Strobe Overdrive: Yes
Dimmable: Yes
Size: 75mm ID XX OD
Driver: Internal MultiDrive
IP Rating: IP65
Wavelengths: White, 365nm, 470nm, 530nm, 625nm, 850nm
RMX140 Dark Field Mini Ring Light
The RMX140 Mini Ring Light Series is specifically engineered for radial and bright field applications. There are multiple lens options available, making this an extremely versatile illumination option. The standard 50° and optional 80° wide lenses are designed to work at a closer working distance, while the long-distance narrow lenses allow the light to work at a longer working distance. The light offers over-current protection in OverDrive™ strobe mode and PNP and NPN trigger signal input.
Specifications
Constant On: Yes
Strobe: Yes
Strobe Overdrive: Yes
Dimmable: Yes
Size: 140mm
Driver: Internal MultiDrive
IP Rating: IP65
Wavelengths: White, 470nm, 505nm, 530nm, 625nm, 850nm
RMX140-RGBW RGBW Mini Ring Light and Driver
The compact and powerful RMX140-RGBW Mini Ring Light is a small to mid-range working distance ring light. The RMX140-RGBW series features an aluminum housing and is IP50 rated. Each wavelength can be tuned individual of the other wavelengths, allowing for the light to output just about any color imaginable.
Specifications
Constant On: Yes
Strobe: Yes
Strobe Overdrive: Yes
Dimmable: Yes
Size: 140mm
Driver: External MultiDrive
IP Rating: IP65
Wavelengths: White, 625nm, 530nm, 470nm
RL200 Large Area Ring Light
The RL200 Large Ring Light Series is designed to produce a homogeneous, uniform light pattern for larger applications and longer working distances. The RL200 runs on an industry-standard 24VDC. The 1-10VDC analog control line gives the user total control over intensity. Proper heat dissipation is achieved using the side extrusion. The 45 mm extrusion makes mounting the light easy when using drop-in T-nuts. The 5-pin M12 connector makes wiring to the light simple.
Specifications
Constant On: Yes
Strobe: Yes
Strobe Overdrive: No
Dimmable: Yes
Size: 200mm Square
Driver: SmartDrive
IP Rating: IP50
Wavelengths: White, 470nm, 505nm, 530nm, 625nm, 850nm
ODRL200 Overdrive Large Area Ring Light
The ODRL200 Large Ring Light Series is designed to produce a homogeneous, uniform light pattern for larger applications and longer working distances. This light operates in OverDrive strobe mode. The ODRL200 runs on an industry-standard 24VDC. Proper heat dissipation is achieved using the side extrusion. The 45 mm extrusion makes mounting the light easy when using drop-in T-nuts. The 5-pin M12 connector makes wiring to the light simple.
Specifications
Constant On: No
Strobe: Yes
Strobe Overdrive: Yes
Dimmable: Yes
Length: 200mm Square
Driver: OverDrive
IP Rating: IP50
Wavelengths: White, 470nm, 505nm, 530nm, 625nm, 850nm
RL300 Large Area Ring Light
The RL300 Large Ring Light Series is designed to produce a homogeneous, uniform light pattern for larger applications and longer working distances. The RL300 runs on an industry-standard 24VDC. The 1-10VDC analog control line gives the user total control over intensity. Proper heat dissipation is achieved using the side extrusion. The 45 mm extrusion makes mounting the light easy when using drop-in T-nuts. The 5-pin M12 connector makes wiring to the light simple.
Specifications
Constant On: Yes
Strobe: Yes
Strobe Overdrive: No
Dimmable: Yes
Size: 300mm Square
Driver: SmartDrive
IP Rating: IP50
Wavelengths: White, 470nm, 505nm, 530nm, 625nm, 850nm
ODRL300 Overdrive Large Area Ring Light
The ODRL300 Large Ring Light Series is designed to produce a homogeneous, uniform light pattern for larger applications and longer working distances. This light operates in OverDrive strobe mode. The ODRL300 runs on an industry-standard 24VDC. Proper heat dissipation is achieved using the side extrusion. The 45 mm extrusion makes mounting the light easy when using drop-in T-nuts. The 5-pin M12 connector makes wiring to the light simple.
Specifications
Constant On: No
Strobe: Yes
Strobe Overdrive: Yes
Dimmable: Yes
Size: 300mm Square
Driver: OverDrive
IP Rating: IP50
Wavelengths: White, 470nm, 505nm, 530nm, 625nm, 850nm
R80 EZ Mount Ring Light
The R80 EZ Mount Ring Light is an all-around durable light. Its simple plug-and-play 5-pin M12 connector is easy to use. The R80 operates with either an NPN or a PNP signal and runs on an industry-standard 24VDC. The 10%-100% intensity control gives users full control over light output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kit adapters.
Specifications
Constant On: Yes
Strobe: Yes
Strobe Overdrive: No
Dimmable: Yes
Size: 80mm Square
Driver: SmartDrive
IP Rating: IP50
Wavelengths: White, 365nm, 395nm, 470nm, 505nm, 530nm, 625nm, 850nm, 950nm
R130 EZ Mount Ring Light
Heat is dissipated through the aluminum housing, allowing the R130 EZ Mount Ring Light Series to be run at a higher current and a greater intensity. Its simple plug-and-play 5-pin M12 connector is easy to use. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kit adapters.
Specifications
Constant On: Yes
Strobe: Yes
Strobe Overdrive: No
Dimmable: Yes
Length: 130mm
Driver: SmartDrive
IP Rating: IP50
Wavelengths: White, 365nm, 395nm, 470nm, 505nm, 530nm, 625nm, 850nm, 950nm
ODR80 Overdrive EZ Mount Ring Light
The ODR80 EZ Mount Ring Light Series is an all-around durable light that operates in OverDrive strobe mode. Its simple plug-and-play 5-pin M12 connector is easy to use. The 1-10VDC intensity control gives users full control over light output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kit adapters.
Specifications
Constant On: No
Strobe: Yes
Strobe Overdrive: Yes
Dimmable: Yes
Length: 80mm Square
Driver: OverDrive
IP Rating: IP50
Wavelengths: White, 365nm, 395nm, 470nm, 505nm, 530nm, 625nm, 850nm, 950nm
ODR130 Overdrive EZ Mount Ring Light
The ODR130 EZ Mount Ring Light Series is an all-around durable light that also features an OverDrive strobe driver with NPN or PNP signal trigger inputs. Its simple plug-and-play 5-pin M12 connector is easy to use. The 10%-100% intensity control gives users full control over light output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kit adapters.
Specifications
Constant On: No
Strobe: Yes
Strobe Overdrive: Yes
Dimmable: Yes
Length: 130mm
Driver: OverDrive
IP Rating: IP50
Wavelengths: White, 365nm, 395nm, 470nm, 505nm, 530nm, 625nm, 850nm, 950nm
ODR130-16 Overdrive 16 LED EZ Mount Ring Light
The ODR130-16 EZ Mount Ring Light Series is an all-around durable light that also features an OverDrive driver with NPN or PNP signal options and provides double the light output as the standard ODR130. Its simple plug-and-play 5-pin M12 connector is easy to use. The 10%-100% intensity control gives users full control over light output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kit adapters.
Specifications
Constant On: No
Strobe: Yes
Strobe Overdrive: Yes
Dimmable: Yes
Length: 130mm
Driver: OverDrive
IP Rating: IP50
Wavelengths: White, 470nm, 505nm, 530nm, 625nm, 850nm, 950nm
RC130 EZ Mount Ring Light
The RC130 EZ Mount Ring Light Series was designed to produce a large uniform/homogeneous light pattern. To achieve this, the RC130 contains special lenses for creating this near collimated light pattern. Its simple plug and play 5-pin M12 connector is easy to use, while allowing for full control. The RC130 operates with either an NPN or a PNP trigger signal input and runs on an industry-standard 24VDC. The 10%-100% intensity control assists in gaining full control of the light’s output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kit adapters.
Specifications
Constant On: Yes
Strobe: Yes
Strobe Overdrive: No
Dimmable: Yes
Length: 130mm
Driver: SmartDrive
IP Rating: IP50
Wavelengths: White, 365nm, 395nm, 470nm, 505nm, 530nm, 625nm, 850nm, 950nm
RCC130 Near Collimated EZ Mount Ring Light
The RCC130 EZ Mount Ring Light contains special lenses to produce a narrow uniform/homogeneous light pattern. Its simple plug-and-play 5-pin M12 connector is easy to use. The RCC130 operates with either an NPN or a PNP signal and runs on an industry-standard 24VDC. The 10%-100% intensity control gives users full control over light output. A standard 42 mm inner hole diameter allows for use with nearly all camera systems with available step-up and step-down conversion kit adapters.
Specifications
Constant On: Yes
Strobe: Yes
Strobe Overdrive: No
Dimmable: Yes
Length:
Driver: SmartDrive
IP Rating: IP50
Wavelengths: White, 365nm, 395nm, 470nm, 505nm, 530nm, 625nm, 850nm, 950nm